1998 Chevrolet Corvette Spark Plug Wire Set Parts

Choose your Engine for your 1998 Chevrolet Corvette

8 Cyl 5.7L

Showing 1 - 10 of 14 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1998 Chevrolet Corvette Spark Plug Wire Set 8 Cyl 5.7L Taylor Cable

Red; For Vehicles w/LS Truck Headers; 11.75 in.; 135 Deg. Plug Boot w/Headers
409 Spiro-Pro 10.4mm Ignition Wire Set; Red; For Vehicles w/LS Truck Headers; 11.75 in.; 135 Deg. Plug Boot;
409 Spiro-Pro 10.4mm Ignition Wire Set
Product Attributes:
- WARNING CA Proposition 65: Yes
- Boot Type: Spiro Wound
- WARNING CA Proposition 65 Message: Cancer And Reproductive
- Engine: Chevy Ls Gen Iv
- Boot Angle: 135 Degree
Features:
- 10.4mm Diameter
- 100 percent Pure Silicone Ignition Wire
- 350 Ohm Per Foot Resistance
- Heat Treated Fiberglass Braid
- Spiro-Wound Core
- Eliminates Radio Frequency Interference
- Red
10.4mm high performance ignition wires available for street or race applications. 409 Ignition Wire provides continuous heat protection up to 600º F and 102,000 volts dielectric strength. A tightly woven heat treated fiberglass braid is applied over our 100% pure silicone 8mm ignition wire. A 3rd layer of silicone is extruded making it a 10.4mm diameter.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1998 - Chevrolet Corvette	V	-	8 Cyl 5.7L	350

68 In Stock

$137.23 CAD

$164.68 CAD

Brand	Taylor Cable
Part #	T6479213
Condition	New
Warehouse	B

1998 Chevrolet Corvette Spark Plug Wire Set 8 Cyl 5.7L Taylor Cable

Blue; For Vehicles w/LS Truck Headers; 11.75 in.; 135 Deg. Plug Boot w/Headers
409 Spiro-Pro 10.4mm Ignition Wire Set; Blue; For Vehicles w/LS Truck Headers; 11.75 in.; 135 Deg. Plug Boot;
409 Spiro-Pro 10.4mm Ignition Wire Set
Product Attributes:
- WARNING CA Proposition 65: Yes
- Boot Type: Spiro Wound
- WARNING CA Proposition 65 Message: Cancer And Reproductive
- Engine: Chevy Ls Gen Iv
- Boot Angle: 135 Degree
Features:
- 10.4mm Diameter
- 100 percent Pure Silicone Ignition Wire
- 350 Ohm Per Foot Resistance
- Heat Treated Fiberglass Braid
- Spiro-Wound Core
- Eliminates Radio Frequency Interference
- Blue
10.4mm high performance ignition wires available for street or race applications. 409 Ignition Wire provides continuous heat protection up to 600º F and 102,000 volts dielectric strength. A tightly woven heat treated fiberglass braid is applied over our 100% pure silicone 8mm ignition wire. A 3rd layer of silicone is extruded making it a 10.4mm diameter.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1998 - Chevrolet Corvette	V	-	8 Cyl 5.7L	350

38 In Stock

$133.94 CAD

$160.73 CAD

Brand	Taylor Cable
Part #	T6479613
Condition	New
Warehouse	B

1998 Chevrolet Corvette Spark Plug Wire Set 8 Cyl 5.7L Taylor Cable

Blue; For Vehicles w/LS Truck Headers; 11.75 in.; 135 Deg. Plug Boot w/Headers
409 Spiro-Pro 10.4mm Ignition Wire Set; Blue; For Vehicles w/LS Truck Headers; 11.75 in.; 135 Deg. Plug Boot;
409 Spiro-Pro 10.4mm Ignition Wire Set
Product Attributes:
- WARNING CA Proposition 65: Yes
- Boot Type: Spiro Wound
- WARNING CA Proposition 65 Message: Cancer And Reproductive
- Engine: Chevy Ls Gen Iv
- Boot Angle: 135 Degree
Features:
- 10.4mm Diameter
- 100 percent Pure Silicone Ignition Wire
- 350 Ohm Per Foot Resistance
- Heat Treated Fiberglass Braid
- Spiro-Wound Core
- Eliminates Radio Frequency Interference
- Blue
10.4mm high performance ignition wires available for street or race applications. 409 Ignition Wire provides continuous heat protection up to 600º F and 102,000 volts dielectric strength. A tightly woven heat treated fiberglass braid is applied over our 100% pure silicone 8mm ignition wire. A 3rd layer of silicone is extruded making it a 10.4mm diameter.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1998 - Chevrolet Corvette	V	-	8 Cyl 5.7L	350

38 In Stock

$133.94 CAD

$160.73 CAD

Brand	Taylor Cable
Part #	T6479613
Condition	New
Warehouse	B

1998 Chevrolet Corvette Spark Plug Wire Set 8 Cyl 5.7L Taylor Cable

Red; For Vehicles w/LS Truck Headers; 11.75 in.; 135 Deg. Plug Boot w/Headers
409 Spiro-Pro 10.4mm Ignition Wire Set; Red; For Vehicles w/LS Truck Headers; 11.75 in.; 135 Deg. Plug Boot;
409 Spiro-Pro 10.4mm Ignition Wire Set
Product Attributes:
- WARNING CA Proposition 65: Yes
- Boot Type: Spiro Wound
- WARNING CA Proposition 65 Message: Cancer And Reproductive
- Engine: Chevy Ls Gen Iv
- Boot Angle: 135 Degree
Features:
- 10.4mm Diameter
- 100 percent Pure Silicone Ignition Wire
- 350 Ohm Per Foot Resistance
- Heat Treated Fiberglass Braid
- Spiro-Wound Core
- Eliminates Radio Frequency Interference
- Red
10.4mm high performance ignition wires available for street or race applications. 409 Ignition Wire provides continuous heat protection up to 600º F and 102,000 volts dielectric strength. A tightly woven heat treated fiberglass braid is applied over our 100% pure silicone 8mm ignition wire. A 3rd layer of silicone is extruded making it a 10.4mm diameter.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1998 - Chevrolet Corvette	V	-	8 Cyl 5.7L	350

68 In Stock

$137.23 CAD

$164.68 CAD

Brand	Taylor Cable
Part #	T6479213
Condition	New
Warehouse	B

1998 Chevrolet Corvette Spark Plug Wire Set MSD

8.5mm; Black; Custom Fit To OEM Specifications; Straight Boots
Custom Spark Plug Wire Set; 8.5mm; Black; Custom Fit To OEM Specifications; Straight Boots;
Custom Spark Plug Wire Set
Product Attributes:
- WARNING CA Proposition 65: No
- Boot Type: Multi-angle
- Engine: Oem
- Engine Make/Size: Oem
Features:
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
- Bolt-on Performance
Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 8 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.

Additional Fitment Information:

Vehicle
1998 - Chevrolet Corvette

4 In Stock

$183.97 CAD

$220.76 CAD

Brand	MSD
Part #	M4632813
Condition	New
Warehouse	B

1998 Chevrolet Corvette Spark Plug Wire Set MSD

8.5mm; Red; Custom Fit To OEM Specifications; Straight Boots
Custom Spark Plug Wire Set; 8.5mm; Red; Custom Fit To OEM Specifications; Straight Boots;
Custom Spark Plug Wire Set
Product Attributes:
- WARNING CA Proposition 65: No
- Boot Type: Multi-angle
- Engine: Oem
Features:
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
- Bolt-on Performance
Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 8 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.

Additional Fitment Information:

Vehicle
1998 - Chevrolet Corvette

75 In Stock

$181.99 CAD

$218.39 CAD

Brand	MSD
Part #	M4632819
Condition	New
Warehouse	B

1998 Chevrolet Corvette Spark Plug Wire Set MSD

8.5mm; Black; Custom Fit To OEM Specifications; Straight Boots
Custom Spark Plug Wire Set; 8.5mm; Black; Custom Fit To OEM Specifications; Straight Boots;
Custom Spark Plug Wire Set
Product Attributes:
- WARNING CA Proposition 65: No
- Boot Type: Multi-angle
- Engine: Oem
- Engine Make/Size: Oem
Features:
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
- Bolt-on Performance
Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 8 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.

Additional Fitment Information:

Vehicle
1998 - Chevrolet Corvette

4 In Stock

$183.97 CAD

$220.76 CAD

Brand	MSD
Part #	M4632813
Condition	New
Warehouse	B

1998 Chevrolet Corvette Spark Plug Wire Set 8 Cyl 5.7L Taylor Cable

Black; Stock; 9.5 in.; 180 Deg. Plug Boot
8mm Spiro-Pro Ignition Wire Set; Black; Stock; 9.5 in.; 180 Deg. Plug Boot;
8mm Spiro-Pro Ignition Wire Set
Product Attributes:
- WARNING CA Proposition 65: Yes
- Boot Type: Spiro Wound
- WARNING CA Proposition 65 Message: Cancer And Reproductive
- Engine: Universal 8 Cylinder
- Boot Angle: 180 Degree
Features:
- 350 Ohm Per Foot Resistance
- Spiro-Wound With Stainless Steel Wire
- Covered With A Conductive Fluorocarbon Material
- Provides More Fire Power To the Spark Plugs
- Two Layers Of 100 percent Pure Silicone
- Eliminates Radio Frequency Interference
- Black
Spiro Pro 8mm wire is the top choice of Racers and Enthusiasts due to its affordable value and overall high performance features. Offers heat protection to 600º F. Provides 65,000 volts of dielectric strength.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1998 - Chevrolet Corvette	V	-	8 Cyl 5.7L	350

Brand	Taylor Cable
Part #	T6474044
Condition	New
Warehouse	B

1998 Chevrolet Corvette Spark Plug Wire Set 8 Cyl 5.7L Taylor Cable

Black; Stock; 9.5 in.; 180 Deg. Plug Boot
8mm Spiro-Pro Ignition Wire Set; Black; Stock; 9.5 in.; 180 Deg. Plug Boot;
8mm Spiro-Pro Ignition Wire Set
Product Attributes:
- WARNING CA Proposition 65: Yes
- Boot Type: Spiro Wound
- WARNING CA Proposition 65 Message: Cancer And Reproductive
- Engine: Universal 8 Cylinder
- Boot Angle: 180 Degree
Features:
- 350 Ohm Per Foot Resistance
- Spiro-Wound With Stainless Steel Wire
- Covered With A Conductive Fluorocarbon Material
- Provides More Fire Power To the Spark Plugs
- Two Layers Of 100 percent Pure Silicone
- Eliminates Radio Frequency Interference
- Black
Spiro Pro 8mm wire is the top choice of Racers and Enthusiasts due to its affordable value and overall high performance features. Offers heat protection to 600º F. Provides 65,000 volts of dielectric strength.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1998 - Chevrolet Corvette	V	-	8 Cyl 5.7L	350

Brand	Taylor Cable
Part #	T6474044
Condition	New
Warehouse	B

1998 Chevrolet Corvette Spark Plug Wire Set MSD

8.5mm; Red; Fits GM Gen-III Engines [LS1/LS6]; Perfect For Relocated Coils; 90 Degree And Multi-Angled Boots Supplied
Universal Spark Plug Wire Set; 8.5mm; Red; Fits GM Gen-III Engines [LS1/LS6]; Perfect For Relocated Coils; 90 Degree And Multi-Angled Boots Supplied;
Universal Spark Plug Wire Set
Product Attributes:
- WARNING CA Proposition 65: No
- Boot Type: Multi-angle
- Engine: Chevy Ls Series
Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Includes Mini-Stripper-Crimper For Factory Style Crimps
Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them exactly how they see fit. Our Universal spark plug wire sets come with the spark plug terminal and boot installed on both ends. LS Boots and terminals are included so you can cut the wire to the desired length, then install the LS terminal with the supplied Mini-Stripper-Crimper. Its a little more work, but in the end it will be worth it.